Tightening Torque Specifications - Suzuki Jimny Workshop Manual
1D
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Camshaft housing bolts (for tightening of special tool) | 8 | 0.8 | 6.0 |
 |
| Camshaft housing bolt | 11 | 1.1 | 8.0 |
|
| Cylinder head cover bolts | 8 | 0.8 | 6.0 |
|
| Intake manifold bolts and nuts | 25 | 2.5 | 18.0 |
|
| Engine mounting bracket bolts | 50 | 5.0 | 36.5 |
|
| Vehicle with M/T: Cylinder block and transmission fastening bolts and nuts | 94 | 9.4 | 68.0 |
|
| Vehicle with A/T: Cylinder block and transmission fastening bolts and nuts | 80 | 8.0 | 58.0 |
|
| Torque converter bolts | 20 | 2.0 | 14.5 |
|
| Exhaust pipe bolts | 50 | 5.0 | 36.5 |
|
| Timing chain cover bolts and nut | 23 | 2.3 | 17.0 |
|
| Crankshaft pulley bolt | 150 | 15.0 | 108.5 |
|
| Oil control valve mounting nuts | 11 | 1.1 | 8.0 |
|
| Oil gallery pipe No.1 bolts | 30 | 3.0 | 21.5 |
|
| Timing chain cover bolts | 25 | 2.5 | 18.0 |
|
| Timing chain cover nut | 25 | 2.5 | 18.0 |
|
| Water pipe bolts | 25 | 2.5 | 18.0 |
|
| Oil gallery pipes No.2 and No.3 bolts | 11 | 1.1 | 8.0 |
|
| Timing chain No.1 guide bolt | 9 | 0.9 | 6.5 |
|
| Timing chain tensioner bolt | 22 | 2.2 | 16.0 |
|
| Timing chain tensioner adjuster bolt | 11 | 1.1 | 8.0 |
|
| Timing chain No.1 guide bolts | 9 | 0.9 | 6.5 |
|
| Timing chain tensioner adjuster bolts | 11 | 1.1 | 8.0 |
|
| Camshaft housing bolts | 11 | 1.1 | 8.0 |
|
| Intake cam timing sprocket bolts | 60 | 6.0 | 43 |
|
| Venturi plug | 5 | 0.5 | 3.5 |
|
| Cylinder head bolt for M8 | 22 | 2.2 | 16.0 |
|
| Cylinder head bolt for M10 | 40 N·m (4.0 kgf-m, 29.0 lbf-ft) and extra tightening 60° twice |
|
||
| Connecting rod bearing cap nut | 15 N·m (1.5 kgf-m, 11.0 lbf-ft) and extra tightening 45° twice |
|
||
| Sensor plate bolt | 11 | 1.1 | 8.0 |
|
| Main bearing cap No.1 bolt ((1) – (10)) | 50 N·m (5.0 kgf-m, 36.5 lbf-ft) and extra tightening 60° |
|
||
| Main bearing cap No.2 bolt ((11) – (20)) | 22 | 2.2 | 16.0 |
|
| Rear oil seal housing bolt | 11 | 1.1 | 8.0 |
|
| Flywheel or drive plate bolt | 70 | 7.0 | 51.0 |
|
NOTE:
The specified tightening torque is also described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.