Timing Chain Cover Components - Suzuki Jimny Workshop Manual
1D
Timing Chain Cover Components
Without VVT
| [A]: | Sealant application amount | 5. | Pin |
| “a”: | 3 mm (0.12 in.) | 6. | Cylinder head cover gasket |
| “b”: | 2 mm (0.08 in.) | 7. | Timing chain cover mounting bolts |
| 1. | Crankshaft pulley bolt |
8.
|
Cylinder head cover
: Apply sealant 99000-31250 to the sealing point for timing chain cover mating surface and cylinder head gasket sealing point referring to “Installation” under Cylinder Head Cover Removal and Installation:M13A . |
| 2. | Crankshaft pulley |
:
|
Tightening torque |
3.
|
Oil seal
: Apply engine oil to oil seal lip. |
:
|
Do not reuse. |
4.
|
Timing chain cover
: Apply sealant 99000-31140 to the mating surface of cylinder and cylinder head. : Apply sealant 99000-31250 to the mating surface of timing chain cover referring to the figure of Step 1) of “Installation” under Timing Chain Cover Removal and Installation:M13A . |
With VVT
| [A]: | Sealant application amount | 7. | Oil gallery pipe No.1 | 16. | Oil control valve mounting nut |
| “a”: | 3 mm (0.12 in.) | 8. | Copper washer | 17. | O-ring |
| “b”: | 2 mm (0.08 in.) | 9. | Oil gallery pipe No.1 bolt | 18. | Water pipe |
| 1. | Crankshaft pulley bolt | 10. | Oil gallery pipe No.2 | 19. | O-ring |
| 2. | Crankshaft pulley | 11. | Oil gallery pipe No.2 bolt | 20. | Water pipe bolt |
|
3.
|
Oil seal
: Apply engine oil to oil seal lip. |
12. | Oil gallery pipe No.3 | 21. | Timing chain cover mounting nut |
4.
|
Timing chain cover
: Apply sealant 99000-31140 to the mating surface of cylinder and cylinder head. : Apply sealant 99000-31260 to the mating surface of timing chain cover referring to the figure of Step 1) of “Installation” under Timing Chain Cover Removal and Installation:M13A . |
13. | Oil gallery pipe No.3 bolt |
:
|
Tightening torque |
| 5. | Pin | 14. | O-ring |
:
|
Do not reuse. |
| 6. | Timing chain cover mounting bolts | 15. | Oil control valve |