1. | Valve cotters | 6. | Intake valve | 11. |
Cylinder head gasket
: “TOP” mark provided on gasket comes to crankshaft pulley side, facing up. |
2. | Valve spring retainer | 7. | Exhaust valve | 12. | Knock pin |
3. | Valve spring | 8. | Valve guide | : | Tightening torque |
4. | Valve stem seal | 9. |
Cylinder head bolt
1) Tighten all bolts at 40 N·m (4.0 kg-m). 2) Turn all bolts to 60°. 3) Then, turn all bolts to 60° once again. |
: | Do not reuse. |
5. |
Valve spring seat
|
10. |
Cylinder head
|
: | Apply engine oil to sliding surface of each part. |