DTC Table - Suzuki Jimny Workshop Manual
10C
DTC Table
Immobilizer Control Module
|
DTC No.
(indicated on SUZUKI scan tool) |
DTC No. (indicated by voltmeter indicator) |
Voltmeter
Indication |
Diagnostic Area | Diagnosis |
|---|---|---|---|---|
| NO DTC | — |
 |
Normal (No code) | This code appears when none of the other codes are identified. |
 11 |
11 |
|
Transponder code | Diagnose trouble according to Immobilizer Control System Check:M13A Model corresponding to each code No. |
|
31 |
31 |
|
||
|
*32 |
*32 |
|
||
|
12 |
12 |
|
Immobilizer Control Module | |
|
13 |
13 |
|
Coil antenna or ignition key with built-in transponder | |
|
21 |
21 |
|
ECM/Immobilizer Control Module code | |
|
22 |
22 |
|
Ignition switch circuit | |
|
23 |
23 |
|
Serial data link circuit |
NOTE:
The DTC with asterisk (*) in DTC column is for vehicle equipped with air bag system.
ECM
To learn how to read diagnostic trouble code (DTC) from flashing of malfunction indicator lamp, refer to
DTC Table:M13A without VVT
.
| DTC No. (indicated on SUZUKI scan tool) | DTC No. (indicated by MIL) | Malfunction Indicator Lamp (MIL) flashing pattern | Diagnostic Area | Diagnosis |
|---|---|---|---|---|
| NO DTC | 12 |
|
Normal | This code appears when it is confirmed that none of other trouble codes is set for immobilizer control system or engine and emission control system. |
| P1623 | 81 |
|
ECM/Immobilizer Control Module code | Diagnose trouble according to Immobilizer Control System Check:M13A Model corresponding to each code No. |
| P1620 | 84 |
|
||
| P1622 | 82 |
|
ECM | |
| P1621 | 83 |
|
Serial data link wire |