Steering System Inspection - Suzuki Jimny Workshop Manual

1) Check steering wheel for play and rattle, holding vehicle in straight forward condition on the ground.

2) Check universal joints of steering lower shaft (1) for rattle and damage. If rattle or damage is found, replace defective part with a new one.

3) Check steering linkage (including kingpin) for looseness and damage. Repair or replace defective parts, if any.

4) Check bolts and nuts for tightness and retighten them as necessary. Repair or replace defective parts, if any.
Refer to table of Tightening Torque Specifications and Tightening Torque Specifications .

5) Inspect steering gear box (2) for evidence of oil leakage.
If leakage is found, check oil level in gear box.

6) Check boots of steering linkage for damage (leaks, detachment, tear, dent, etc.). If damage is found, replace defective boot with new one.

7) Check wheel alignment. Refer to Front Wheel Alignment Inspection and Adjustment .