Tightening Torque Specifications - Suzuki Jimny Workshop Manual
6C
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Tension pulley bolt | 25 | 2.5 | 18.0 |
 |
| Oil pump mounting bolt (M13 engine model) | 25 | 2.5 | 18.5 |
|
| Oil pump mounting bolt (K9K engine model) | 28 | 2.8 | 20.0 |
|
| Oil pump high pressure union bolt (M13 engine model) | 60 | 6.0 | 43.5 |
|
| Oil pump high pressure flare nut (K9K engine model) | 28 | 2.8 | 20.0 |
|
| Oil pump cover bolt | 28 | 2.8 | 20.0 |
|
| Plug | 60 | 6.0 | 43.5 |
|
| Pressure switch | 28 | 2.8 | 20.0 |
|
| Suction connector bolt | 12 | 1.2 | 8.5 |
|
| Power steering gear box mounting bolt and nut | 80 | 8.0 | 58.0 |
|
| Gear box high pressure union bolt | 35 | 3.5 | 25.5 |
|
| Pitman arm mounting nut | 135 | 13.5 | 98.0 |
|
| Steering shaft lower joint bolt | 25 | 2.5 | 18.0 |
|
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.