Selector Rod Adjustment - Suzuki Jimny Workshop Manual
5A
Selector Rod Adjustment
1)
Shift manual shift lever to “N” range (transmission range sensor “N” range).
2)
Turn nuts (1) by hand till it contacts control shift lever joint. Then tighten them with wrench.
3)
After select cable was installed, check for the following.
•
Push vehicle with selector lever shifted to “P” range.
Vehicle should not move.
• Vehicle can not be driven in “N” range.
• Vehicle can be driven in “D”, “3”, “2” and L ranges.
• Vehicle can be backed and back-up lamp lights in “R” range.
• Vehicle can be engine starts in “P” and “N” range.
• Vehicle can not be engine starts in “D”, “3”, “2”, “L” and “R” range.
• Thing that indicator lamp of meter panel moves similarly.
Vehicle should not move.
• Vehicle can not be driven in “N” range.
• Vehicle can be driven in “D”, “3”, “2” and L ranges.
• Vehicle can be backed and back-up lamp lights in “R” range.
• Vehicle can be engine starts in “P” and “N” range.
• Vehicle can not be engine starts in “D”, “3”, “2”, “L” and “R” range.
• Thing that indicator lamp of meter panel moves similarly.