Tightening Torque Specifications - Suzuki Jimny Workshop Manual
1G
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Brake pipe joint bolt | 11 | 1.1 | 8.0 |
 |
| LSPV bracket bolt | 25 | 2.5 | 18.0 |
|
| High pressure pipe union nut | 38 | 3.8 | 27.5 |
(See NOTE below.)
|
| Common rail nut | 28 | 2.8 | 20.5 |
|
| Injector cover bracket nut | 12 | 1.2 | 9.0 |
|
| Oil level gauge guide nut | 21 | 2.1 | 15.5 |
|
| Fuel injector bracket bolt | 28 | 2.8 | 20.5 |
|
| Injection pump bolt | 27 | 2.7 | 19.5 |
|
| Injection pump pulley nut | 15 N·m (1.5 kgf-m, 11.0 lbf-ft) and 60° by the specified procedure |
|
||
| Venturi bolt | 5.5 | 0.55 | 4.0 |
|
| Fuel temperature sensor | 15 | 1.5 | 11.0 |
|
| Fuel flow actuator bolt | 5.5 | 0.55 | 4.0 |
|
| Fuel tank mounting bolt | 29 | 2.9 | 21.0 |
|
| Fuel level gauge bolt | 10.5 | 1.05 | 7.5 |
|
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.