1G
Fuel Pump Removal and Installation
Removal
WARNING:
Before starting the following procedure, be sure to observe Precautions on Fuel System Service:M13A .
1) Remove fuel tank from vehicle. Refer to Fuel Tank Removal and Installation:M13A .
2) Disconnect wire harness coupler and fuel vapor hose from fuel pump assembly.
3) Remove fuel pump assembly from fuel tank by removing bolts.
Installation
1) Clean mating surfaces of fuel pump assembly and fuel tank.
2) Install new gasket (2) and plate (3) to fuel pump assembly (1) then install fuel pump assembly to fuel tank.
Tightening torque
Fuel pump assembly bolts ( a ): 10 N·m ( 1.0 kg-m, 7.5 lb-ft)
3) Connect wire harness coupler (2) and fuel vapor hose (3) to fuel pump assembly (1).
4) Install fuel tank to vehicle. Refer to Fuel Tank Removal and Installation:M13A .