1F
Water Pump Removal and Installation
NOTE:
Do not disassemble water pump.
If any repair is required on pump, replace it as assembly.
Removal
1) Remove engine assembly referring to Engine Assembly Removal and Installation:K9K .
3) Remove water pump (1) from cylinder block.
Installation
1) Install water pump (1) to cylinder block with new gasket, and tighten water pump bolts (2) specified torque after applying specified sealant.
“A” : Thread lock cement ( Loctite FRENETANCH® )
Tightening torque
Water pump bolt ( a ): 11 N·m ( 1.1 kg-m, 8.0 lb-ft)
2) Install timing belt referring to Timing Belt and Belt Tensioner Removal and Installation:K9K .
3) Install engine assembly referring to Engine Assembly Removal and Installation:K9K .