Tightening Torque Specifications - Suzuki Jimny Workshop Manual
1D
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Air cleaner outlet hose clamp | 2.5 | 0.25 | 2.0 |
 |
| Intercooler bracket bolt | 25 | 2.5 | 18.0 |
|
| Intercooler hose clamp No.1 | 4 | 0.4 | 3.0 |
|
| Cylinder head cover bolt | Tighten 12 N·m (1.2 kgf-m, 9.0 lbf-ft) by the specified procedure |
|
||
| Generator upper bracket bolt | 40 | 4.0 | 29.0 |
|
| Turbocharger nut (without flange) | 25 | 2.5 | 18.0 |
|
| Turbocharger nut (with flange) | 29 | 2.9 | 21.0 |
|
| Turbocharger oil return pipe bolt | 12 | 1.2 | 9.0 |
|
| Lubrication pipe | 23 | 2.3 | 17.0 |
|
| Lubrication pipe union bolt (TORX® head type) | 23 | 2.3 | 17.0 |
|
| Lubrication pipe union bolt (Hexagon head type) | 18 | 1.8 | 13.0 |
|
| Lubrication pipe clamp bolt | 12 | 1.2 | 9.0 |
|
| Engine mounting nut | 55 | 5.5 | 40.0 |
|
| Timing belt tensioner bolt | 27 | 2.7 | 19.5 |
|
| Camshaft pulley bolt | 14 | 1.4 | 10.5 |
|
| Crankshaft pulley bolt | 120 N·m (12.0 kgf-m, 87.0 lbf-ft) and 95° by the specified procedure |
|
||
| TDC pin cap | 20 | 2.0 | 14.5 |
|
| Generator upper bracket support bolt | 21 | 2.1 | 15.5 |
|
| CMP sensor bolt | 8 | 0.8 | 6.0 |
|
| Camshaft housing bolt | Tighten 10 N·m (1.0 kgf-m, 7.5 lbf-ft) by the specified procedure |
|
||
| Camshaft cover bolt | Tighten 5 N·m (0.5 kgf-m, 4.0 lbf-ft) and 12 N·m (1.2 kgf-m, 9.0 lbf-ft) by the specified procedure |
|
||
| Vacuum pump oil hose union bolt | 16 | 1.6 | 12.0 |
|
| Camshaft pulley nut | Tighten 30 N·m (3.0 kgf-m, 22.0 lbf-ft) and 85° by the specified procedure |
|
||
| Cylinder head bolt | Tighten 25 N·m (2.5 kgf-m, 18.0 lbf-ft) and 255° by the specified procedure |
|
||
| Connecting rod bearing cap bolt | Tighten 20 N·m (2.0 kgf-m, 14.5 lbf-ft) and 45° by the specified procedure |
|
||
| Main bearing cap bolt | Tighten 25 N·m (2.5 kgf-m, 18.0 lbf-ft) and 47° by the specified procedure |
|
||
| Engine right mounting nut | 55 | 5.5 | 40.0 |
|
| Engine left mounting nut | 40 | 4.0 | 29.0 |
|
| Engine side mounting bracket bolt | 40 | 4.0 | 29.0 |
|
NOTE:
The specified tightening torque is also described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.