9G
Front Seat Heater Wire (If Equipped) Inspection
1) Confirm that seat heater switch is OFF position.
2) Disconnect two couplers of seat heater under the seat cushion.
3) Check for continuity between terminals as shown below.
If not continuity is indicated, replace faulty seat heater.
Seat heater circuit specifications
Seat back: Continuity between “D” and “H”
Seat back: Continuity between “E” and “G”
Seat back: Continuity between “F” and “I”
Seat cushion: Continuity between “A” and “B”
Seat cushion: Continuity between “A” and “C”
1. Heater wire
2. Thermostat