9F
Replacement of Transmitter Battery
CAUTION:
Use care not to allow grease or dirt to be attached on the printed circuit board and the battery.
NOTE:
To prevent theft, be sure to break the transmitter before discarding it.
Dispose of the used battery properly according to applicable rules or regulations. Do not dispose of lithium batteries with ordinary household trash.
If transmitter becomes unreliable, replace transmitter battery as follows.
M13 Engine Model
1) Remove screw (1) and remove cover (2).
2) Remove transmitter (3) from transmitter holder (4).
3) Put edge of coin or flat blade screwdriver in slot of transmitter (3) and by pry it open.
4) Replace the battery (lithium disc-type CR1616 or equivalent battery) so its (+) terminal faces “+” mark on transmitter.
5) Fit together transmitter (3) and install it into transmitter holder (4).
6) Install transmitter cover (2) and screw (1).
7) Make sure the door locks can be operated with transmitter.
K9K Engine Model
1) Put the edge of a coin (1) or a flat blade screwdriver in the slot (2) of transmitter (3) and pry it open.
2) Replace battery (lithium disc-type CR 2032 or equivalent battery) (4) so its (+) terminal faces the “+” mark of the transmitter (3).
3) Close the transmitter (3) firmly.
4) Make sure the door locks can be operated with transmitter (3).