9F
Keyless Entry System Operation Inspection
NOTE:
For M13 engine model, if keyless entry system is in interior light signal mode, change to hazard warning light signal mode referring to “Change of Signal Mode:” under Keyless Entry System (If Equipped) Description (For M13 Engine Model) .
1) Confirm that power door lock system is good condition referring to Power Door Lock System Operation Inspection .
2) Confirm that turn signal and hazard warning light system is good condition referring to Turn Signal and Hazard Warning Lights Symptom Diagnosis .
3) Check transmitter battery for dead. If battery is dead, replace battery referring to Replacement of Transmitter Battery .
4) Confirm that all doors are closed and unlocked.
5) Check the following operation:
a) When pushing “LOCK” button (1) on transmitter (2), check all doors lock and hazard warning lights flash once.
b) When pushing “UNLOCK” button (3) on transmitter (2), check all doors unlock and hazard warning lights flash twice and interior light turn on about 15 seconds with the interior light switch in the middle position.
[A]: M13 engine model
[B]: K9K engine model
If check result is not satisfied, go to Keyless Entry System Circuit Inspection .