9F
Keyless Entry System (If Equipped) Description (For M13 Engine Model)
The keyless entry system has the following signal modes in order to feed back the signal when the controller received LOCK and UNLOCK signals from transmitter.
Signal mode Received signal
LOCK signal UNLOCK signal
Hazard warning light signal mode The hazard warning lights flash once. The hazard warning lights flash twice and the interior light turns on about 15 seconds.
Interior light signal mode The interior light flashes twice. The interior light turns on about 15 seconds.
NOTE:
These signal modes are able to change referring to Change of Signal Mode .
The initial condition is the hazard warning light signal mode.
Change of Signal Mode
1) Confirm that all doors are closed and ignition key is out of ignition switch.
2) Perform the following procedures within 15 seconds.
a) Insert ignition key to ignition switch and pull out ignition key from ignition switch.
b) Repeat step a) two times.
c) Insert ignition key to ignition switch, and then push “LOCK” button on transmitter more than five times.
3) Confirm that hazard warning light or interior light flash once.
With this, change of signal mode is completed.