9E
Quarter Window Removal and Installation
Refer to Windshield Removal and Installation as removal and installation procedures are basically the same. However, note the following.
• Observe the following precautions when applying adhesive (4) along glass edge.
• Adhesive should be applied evenly especially in height.
• Be careful not to damage primer (5).
• Press glass (2) against body quickly after adhesive is applied.
Adhesive amount specification and position for quarter window
Height “b”: 15 mm (0.59 in.)
Width “d”: 15 mm (0.59 in.)
Width “c”: 6 mm (0.23 in.)
Distance “e”: 17 mm (0.67 in.) for glass lower section and rear section
Distance “e”: 12 mm (0.47 in.) for glass upper section
Distance “e”: 14 mm (0.55 in.) for glass front section
1. Pin 3. Double face tape