Front Door Window Regulator Removal and Installation - Suzuki Jimny Workshop Manual
9E
Front Door Window Regulator Removal and Installation
Removal
1)
Remove door glass referring to
Front Door Window Removal and Installation
.
2)
Disconnect power window motor lead wire at coupler and loosen clamp.
3)
Loosen regulator mounting nuts (1) and take out regulator through hole (2) as shown in the figure.
Installation
Reverse removal procedure to install window regulator noting the following instruction.
•
Tighten screws according to the order (a, b, c, d, 1, 2) shown in the figure.
• When installing glass, check that the top part of the glass contacts the glass run evenly and that the glass moves up and down smoothly.
If the glass is tilted with respect to the glass run, make a fine adjustment with the screws.
• When installing glass, check that the top part of the glass contacts the glass run evenly and that the glass moves up and down smoothly.
If the glass is tilted with respect to the glass run, make a fine adjustment with the screws.
Refer to
Front Door Window Removal and Installation
.