Combination Meter Circuit Diagram - Suzuki Jimny Workshop Manual
9C
Combination Meter Circuit Diagram
M13 Engine Model
| 1. | Main fuse | 10. | CPU | 19. | DLC |
| 2. | METER fuse | 11. | Fuel level gauge | 20. | ABS control module (if equipped) |
| 3. | Combination switch | 12. | Brake fluid level switch | 21. | 4WD control module |
| 4. | Speedometer | 13. | Parking brake switch | 22. | Key remainder switch |
| 5. | Tachometer | 14. | Oil pressure switch | 23. | SDM (if equipped) |
| 6. | ECT meter | 15. | Door switch (except driver side) | 24. | Generator |
| 7. | Fuel level meter | 16. | Door switch (driver side) | 25. | Seat belt switch (if equipped) |
| 8. | Odometer (tripmeter) | 17. | ECM | 26. | TCM (A/T vehicle) |
| 9. | Back light | 18. | VSS | *1. | Serial communication line |
K9K Engine Model
| 1. | Main fuse | 10. | CPU | 19. | DLC |
| 2. | METER fuse | 11. | Fuel level gauge | 20. | ABS control module |
| 3. | Combination switch | 12. | Brake fluid level switch | 21. | 4WD control module |
| 4. | Speedometer | 13. | Parking brake switch | 22. | Key remainder switch |
| 5. | Tachometer | 14. | Oil pressure switch | 23. | SDM |
| 6. | ECT meter | 15. | Door switch (except driver side) | 24. | Generator |
| 7. | Fuel level meter | 16. | Door switch (driver side) | 25. | ECT sensor |
| 8. | Odometer (tripmeter) | 17. | ECM | 26. | Brake vacuum switch |
| 9. | Back light | 18. | VSS |
Terminal arrangement of coupler viewed from harness side
Connector “G92”
| Terminal | Circuit | Terminal | Circuit |
|---|---|---|---|
| 1 | To DLC | 11 | To TCM (A/T vehicle) |
| 2 | To combination switch (turn R) | 12 | — |
| 3 | To engine ground | 13 | To SDM (if equipped) |
| 4 | — | 14 | To seat belt switch (if equipped) |
| 5 | — | 15 | To combination switch (headlight switch) |
| 6 | — | 16 | To ECM (ECT meter signal, M13 engine) |
| 7 | — | To ECT sensor (K9K engine) | |
| 8 | — | 17 | To fuel level gauge |
| 9 | — | 18 | To key remainder switch |
| 10 | To ABS control module (ABS indicator control signal, if equipped) | 19 | — |
| 20 | — |
Connector “G93”
| Terminal | Circuit | Terminal | Circuit |
|---|---|---|---|
| 1 | — | 12 | To 4WD control module (4WD indicator control signal) |
| 2 | To ECM (tachometer signal) | 13 | To parking brake switch |
| 3 | To door switch (except driver side) | 14 | To brake fluid level switch and brake vacuum switch (K9K engine) |
| 4 | To door switch (driver side) | ||
| 5 | To oil pressure switch | 15 | To generator |
| 6 | To ECM (glow plug indicator light / injection warning light / water in fuel warning light control signal, K9K engine) | 16 | To 4WD control module (4L indicator control signal) |
| 7 | To ECM (red stop warning light control signal, K9K engine) | 17 | — |
| 18 | To VSS | ||
| 8 | To ECM (MIL control signal) | 19 | — |
| 9 | — | 20 | To combination switch (turn L) |
| 10 | To ECM (immobilizer indicator control signal, if equipped) | 21 | To ignition switch |
| 11 | To combination switch (dimmer switch) | 22 | To main fuse |