Tightening Torque Specifications - Suzuki Jimny Workshop Manual
7B
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Flared Nut used for 8 mm pipe | 13 | 1.3 | 9.5 |
 |
| Flared Nut used for 12 mm pipe | 23 | 2.3 | 17.0 |
|
| Flared Nut used for 14.5 mm pipe | 33 | 3.3 | 24.0 |
|
| Dual pressure switch | 10 | 1.0 | 7.0 |
|
| Refrigerant pressure sensor | 9.0 | 0.9 | 6.5 |
|
| Compressor mounting bolt | 28 | 2.8 | 20.5 |
|
| Thermal switch | 12 | 1.2 | 9.0 |
|
| Clutch plate bolt | 14 | 1.4 | 10.5 |
|
| Magnet clutch plate bolt | 14 | 1.4 | 10.5 |
|
| Front head bolts | 14 | 1.4 | 10.5 |
|
| Front head bolts | 23 | 2.3 | 17 |
|
| Front heat bolts | 9 | 0.9 | 6.5 |
|
| Front heat bolts | 23 | 2.3 | 17.0 |
|
| Relief valve | 10 | 1.0 | 7.5 |
|
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.