7B
Receiver/Dryer Desiccant Removal and Installation (M13A Model)
Removal
1) Remove condenser assembly referring to Condenser Assembly Removal and Installation (M13A Model) .
2) Remove circlip (1), receiver/dryer cap (2) and filter (3).
3) Remove desiccant.
Installation
Reverse removal procedure to install desiccant noting the following instructions.
Do not remove desiccant from the plastic bag until just before inserting it into the receiver.
Replenish specified amount of compressor oil to compressor suction side by referring to “Replenishing Compressor Oil” in Operation Procedure for Refrigerant Charging .
Sufficiently apply compressor oil to the fitting surface of the O-ring and the cap.