6C
P/S Pump Drive Belt Removal and Installation
M13 Engine Model
Removal
1) Disconnect negative cable at battery.
2) Loosen tension pulley bolts (2).
3) Remove power steering belt (1).
Installation
Reference: P/S Pump Drive Belt Inspection and Adjustment
1) Install belt to power steering pump pulley (1), crankshaft pulley (2), A/C pulley (if equipped) (3) and tension pulley (4).
2) Adjust belt tension referring to P/S Pump Drive Belt Inspection and Adjustment .
K9K Engine Model
For removal and Installation of P/S pump drive belt, refer to Generator Drive Belt Removal and Installation:K9K .