Steering Lock Assembly Removal and Installation - Suzuki Jimny Workshop Manual

1) Remove steering column (1) referring to Steering Column Assembly Removal and Installation .

2) Loosen and remove steering lock mounting bolts (2) using center punch (1) as shown.

3) Turn ignition key to ACC or ON position and remove steering lock assembly from steering column.

1) Position oblong hole (1) of steering shaft in the center of hole (3) in column (4).

2) Turn ignition key to ACC or ON position and install steering lock assembly (5) onto column (4).

3) Now turn ignition key to LOCK position and pull it out.

4) Align hub on lock with oblong hole (1) of steering shaft and rotate shaft to assure that steering shaft (2) is locked.

5) Tighten new bolts until head of each bolt is broken off.

6) Turn ignition key to ACC or ON position and check to be sure that steering shaft rotates smoothly. Also check for lock operation.

7) Install steering column referring to Steering Column Assembly Removal and Installation .