5C
Clutch Master Cylinder Inspection
Inspect all disassembled parts for wear or damage, and replace parts if necessary.
NOTE:
•
Wash disassembled parts with brake fluid.
•
Do not reuse piston assembly and circlip.
Inspect cylinder bore for scoring or corrosion.
It is best to replace corroded cylinder. Corrosion can be identified as pits or excessive roughness.
NOTE:
•
Polishing bore of cylinder with cast aluminum body with anything abrasive is prohibited, as damage to cylinder bore may occur.
•
Do not use a cloth to dry cylinder, as lint from cloth cannot be kept away from cylinder bore surfaces.
Rinse cylinder in clean brake fluid. Shake excess rinsing fluid from cylinder.