5C
Clutch Master Cylinder Disassembly and Assembly
Reference: Clutch Master Cylinder Components:K9K Model
Reference: Clutch Master Cylinder Removal and Installation:K9K Model
Disassembly
CAUTION:
Never disassemble push rod assembly, disassembling will affect original performance of clutch system.
1) Remove circlip (1) with push rod (2) pushed in.
2) Blow compressed air gradually into hole for pipe connection to remove piston assembly (1), using care to prevent it from jumping out.
Assembly
Reference: Clutch Master Cylinder Inspection:K9K Model
NOTE:
Before installation, wash each part in specified brake fluid.
1) Perform Clutch Master Cylinder Inspection:K9K Model .
2) Apply brake fluid to piston assembly and inside of cylinder body.
3) Install piston assembly into cylinder.
4) Apply grease to spheral end of push rod, and then install circlip (1) with push rod (2) pushed in.
: Grease 99000–25100 ( SUZUKI Silicone Grease )