Clutch Cable Removal and Installation - Suzuki Jimny Workshop Manual

1) Remove clutch housing cap (3).

2) Loosen clutch cable adjust nut (1) and disconnect clutch cable from release fork (2).

3) Disconnect cable hook (2) at clutch pedal shaft arm (1), then take off cable.

1) Before installing cable, apply grease to cable end hook (2) and release fork (4) as shown in the figure.

2) Screw in clutch cable adjust nut (3) and adjust free travel of pedal to specification by turning nut.

3) Check clutch for proper function with engine running.