5C
Clutch Pedal Switch Removal and Installation
Removal
1) Disconnect clutch pedal switch (1) connector with ignition switch OFF.
2) Remove clutch pedal switch (1) from pedal bracket (2).
Installation
1) Install clutch pedal switch (1) to pedal bracket (2).
2) Depress clutch pedal (3).
3) Adjust switch position so that clearance between end of thread and clutch pedal bracket is within specification.
Clearance “a” between end of thread and clutch pedal bracket
6.3 – 6.8 mm (0.25 – 0.27 in.)
4) Tighten lock nut (4) to specified torque.
Tightening torque
Clutch pedal switch lock nut ( a ): 7.5 N·m ( 0.75 kg-m, 5.5 lb-ft)
5) Connect connector to clutch pedal switch (1) securely.