5B
Manual Transmission Oil Change
1) Before changing or inspecting oil, be sure to stop engine and lift vehicle horizontally.
2) With vehicle lifted up, check oil leakage.
If leakage exists, correct or repair it.
3) Remove oil filler plug (2).
4) Remove drain plug (1), and drain old oil.
5) Apply sealant to thread of drain plug, and then tighten it to specified torque.
“A” : Sealant 99000–31260 ( SUZUKI Bond No.1217G )
Tightening torque
Transmission oil drain plug ( a ): 23 N·m ( 2.3 kg-m, 17.0 lb-ft)
6) Pour new specified oil until oil level reaches bottom of oil filler plug hole (3) as shown in figure.
NOTE:
• For SAE classification, refer to viscosity chart [A].
• It is highly recommended to use API GL-4 75 W – 90 gear oil.
Transmission oil specifications
Capacity : 1.3 liters (2.8/2.3 US/lmp. pt)
Oil grade : API GL-4
7) Apply sealant to thread of level/filler plug, and then tighten it to specified torque.
“A” : Sealant 99000–31260 ( SUZUKI Bond No.1217G )
Tightening torque
Transmission oil level/filler plug ( a ): 23 N·m ( 2.3 kg-m, 17.0 lb-ft)