5A
Oil Pump Assembly Disassembly and Reassembly
Disassembly
1) Remove 2 oil seal rings (1) from stator shaft (2).
2) Remove 11 oil pump subassembly bolts (1), then remove stator shaft (2) from oil pump body.
3) Remove drive gear (1) and driven gear (2) from oil pump body (3).
4) Remove oil seal (1) and O-ring (2) from oil pump body (3).
Reassembly
1) After applying A/T fluid to new oil seal (1) and new O-ring (2), install them to oil pump body.
Use special tool and hammer to install oil seal (1), then apply grease to its lip.
Special Tool
(A) : 09913–85210
“A” : Grease 99000–25030 ( SUZUKI Super Grease C )
2) Install driven gear (1) and drive gear (2) in such direction that their punch marks (3) can be seen.
3) After applying A/T fluid to new seal ring (1), install it to oil pump body.
4) Install stator shaft (2) to oil pump body and tighten 11 oil pump subassembly bolts (3) to specification.
Tightening torque
Oil pump subassembly bolts ( a ): 10 N·m ( 1.0 kg-m, 7.5 lb-ft)