Solenoid Valves (Shift Solenoid Valves, TCC Solenoid Valve and Timing Solenoid Valve) Removal and Installation
Removal
1)
Disconnect negative cable at battery.
2)
Remove A/T fluid level gauge.
3)
Lift up vehicle.
4)
Remove drain plug and drain A/T fluid.
5)
Install drain plug.
Tightening torque
A/T fluid drain plug
:
17
N·m (
1.7
kg-m,
12.5
lb-ft)
7)
Remove oil filter tube (1).
8)
Remove A/T oil pan (1) and oil pan gasket.
9)
Remove oil strainer assembly (1).
10)
Remove transmission fluid temperature sensor (1) from sensor clamp.
11)
Disconnect solenoid connectors (2).
12)
Remove TCC solenoid valve (1), shift solenoid valve-A (No.1) (2), shift solenoid valve-B (No.2) (3) and timing solenoid valve (4) by removing bolts.
Installation
1)
Install shift solenoid valve-A (No.1) (1), shift solenoid valve-B (No.2) (2), TCC solenoid valve (3) and timing solenoid valve (4).
Tightening torque
Solenoid valve bolts
:
11
N·m (
1.1
kg-m,
8.0
lb-ft)
2)
Connect solenoid connectors identifying their installing positions by wire color.
Solenoid coupler
|
Wire color
|
---|
Shift solenoid valve-A (No.1) (2)
|
White
|
Shift solenoid valve-B (No.2) (3)
|
Black
|
Timing solenoid valve (1)
|
Yellow
|
TCC solenoid valve (4)
|
Light Green
|
3)
Install transmission fluid temperature sensor (5) to sensor clamp.
4)
Install oil strainer assembly (1).
Tightening torque
Oil strainer bolt
(
a
):
10
N·m (
1.0
kg-m,
7.5
lb-ft)
5)
Install new oil pan gasket and oil pan (1).
Tightening torque
Oil pan fixing bolt
(
b
):
11
N·m (
1.1
kg-m,
8.0
lb-ft)