4E
G Sensor Removal and Installation
Removal
1) Turn ignition switch OFF and disconnected battery negative cable.
2) Remove center console box.
3) Disconnected connector from G sensor (2).
CAUTION:
Sensor must not be dropped or shocked. It will affect its original performance.
4) Remove G sensor (2) from floor.
1. Parking brake lever assembly 3. Bolt
Installation
Reference: G Sensor Inspection
1) Connect connector to sensor securely.
2) Install sensor onto floor so that arrow mark directs vehicle forward. Tighten bolts to specified torque.
Tightening torque
G sensor bolt ( a ): 23 N·m ( 2.3 kg-m, 17.0 lb-ft)
3) Install rear console box.