4E
Front Wheel Speed Sensor Ring Removal and Installation
Removal
1) Remove wheel hub with sensor ring. Refer to Wheel Hub / Bearing / Oil Seal Removal and Installation:Front .
2) Remove sensor ring (1) from wheel hub (2) as shown.
CAUTION:
Pull out sensor ring (1) from wheel hub (2) gradually and evenly. Attempt to pull it out partially may cause it to be deformed.
3. Vise 4. Lever
Installation
Reference: Front Wheel Speed Sensor On-Vehicle Inspection
Reference: Front Wheel Speed Sensor Ring Inspection
1) Install sensor ring (3) as shown.
NOTE:
• Pipe (2) used here should have inner diameter of 90 mm (3.55 in.) – 96 mm (3.77 in.) and its outside should not contact teeth of sensor ring.
• Use care not to insert wheel hub diagonally.
1. Steel plate 4. Wheel hub 5. Hydraulic press
2) Install wheel hub, brake disc, brake caliper, locking hub and wheel.
Refer to Wheel Hub / Bearing / Oil Seal Removal and Installation:Front .