ABS Wiring Circuit Diagram - Suzuki Jimny Workshop Manual
4E
ABS Wiring Circuit Diagram
M13 engine model
| [A]: | For M/T model | 8. | Pump motor | 18. | Stop lamp switch |
| [B]: | For A/T model | 9. | Solenoid valves | 19. | ECM |
| [C]: | ABS hydraulic unit / control module connector E142 (viewed from terminal side) | 10. | Combination meter | 20. | G sensor |
| 1. | Battery | 11. | Right rear wheel speed sensor | 21. | 4WD switch (for 4WD model only) |
| 2. | Main fuses box | 12. | Left rear wheel speed sensor | 22. | 4WD indicator lamp (for 4WD model only) |
| 3. | Ignition switch | 13. | Right front wheel speed sensor | 23. | 4WD controller (for 4WD model only) |
| 4. | Circuit fuse box | 14. | Left front wheel speed sensor | 24. | “ABS” warning lamp |
| 5. | ABS hydraulic unit / control module assembly | 15. | Data link connector | 25. | Lamp driver module |
| 6. | ABS solenoid valve relay (transistor) | 16. | Monitor connector | ||
| 7. | ABS pump motor relay (transistor) | 17. | Stop lamp |
K9K engine model
| [A]: | ABS hydraulic unit / control module connector E142 (viewed from terminal side) | 9. | Solenoid valves | 18. | Stop lamp switch |
| 1. | Battery | 10. | Combination meter | 19. | ECM |
| 2. | Main fuse box | 11. | Right rear wheel speed sensor | 20. | G sensor |
| 3. | Ignition switch | 12. | Left rear wheel speed sensor | 21. | 4WD switch (for 4WD model only) |
| 4. | Circuit fuse box | 13. | Right front wheel speed sensor | 22. | 4WD indicator lamp (for 4WD model only) |
| 5. | ABS hydraulic unit / control module assembly | 14. | Left front wheel speed sensor | 23. | 4WD controller (for 4WD model only) |
| 6. | ABS solenoid valve relay (transistor) | 15. | Data link connector | 24. | “ABS” warning lamp |
| 7. | ABS pump motor relay (transistor) | 16. | Monitor connector | 25. | Lamp driver module |
| 8. | Pump motor | 17. | Stop lamp |
Connector “E-42”
| Terminal | Circuit | Terminal | Circuit |
|---|---|---|---|
| 1 | ABS solenoid valve relay (transistor) | 18 | Diagnosis switch terminal |
| 2 | Ground | 19 | — |
| 3 | ABS pump motor relay (transistor) | 20 | — |
| 4 | Ground | 21 | — |
| 5 | — | 22 | Idle up signal (for M13 engine model only) |
| 6 | G sensor signal | 23 | — |
| 7 | — | 24 | 4WD switch (for 4WD model only) |
| 8 | — | 25 | Ignition switch |
| 9 | G sensor ground | 26 | — |
| 10 | Left front wheel speed sensor (–) | 27 | — |
| 11 | Left front wheel speed sensor (+) | 28 | — |
| 12 | Stop lamp switch | 29 | — |
| 13 | Left rear wheel speed sensor (+) | 30 | Right-front wheel speed sensor (–) |
| 14 | Left rear wheel speed sensor (–) | 31 | Right-front wheel speed sensor (+) |
| 15 | “ABS” warning lamp | 32 | — |
| 16 | Data link connector | 33 | Right-rear wheel speed sensor (+) |
| 17 | — | 34 | Right-rear wheel speed sensor (–) |