4C
Rear Brake Shoe Removal and Installation
Removal
1) Remove brake drum referring to Rear Brake Drum Removal and Installation .
2) Remove shoe return spring lower (3), spring and rod assembly (4) and shoe hold down springs (2) by turning shoe hold down pins (1).
WARNING:
Use special care when installing brake shoe return spring. Failure in its proper installation may allow it to spring back and cause personal injury.
3) Remove parking brake shoe lever (5) from brake back plate.
Installation
Assemble parts as shown in reverse order of removal.
1) Apply rubber grease to brake back plate and parking brake shoe lever as shown in the figure.
“A” : Rubber grease
2) Install shoe hold down springs (2) by pushing them down in place and turning hold down pins (1).
3) Install shoe return spring and parking brake shoe lever spring.
4) For procedure hereafter, refer to Rear Brake Drum Removal and Installation .
3. Shoe return spring lower 5. Adjuster lever
4. Spring and rod assembly 3. Adjuster spring