Front Disc Brake Caliper Inspection
Cylinder Slide Bush
Check slide bush for smooth movement as shown.
If it is found faulty, correct or replace. Apply rubber grease to bush outer surface.
Rubber grease should be the on whose viscosity is less affected by such low temperature as –40 °C (–40 °F).
“A” : Rubber grease
[A]: M13 engine model [B]: K9K engine model
Bush Dust Boot and Cylinder Boot
Check boots for breakage, crack and damage. If defective, replace.
[A]: M13 engine model [B]: K9K engine model
Piston Seal
Excessive or uneven wear pad lining may indicate unsmooth return of the piston. In such case, replace rubber seal.