Tightening Torque Specifications - Suzuki Jimny Workshop Manual
3C
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Oil drain plug | 23 | 2.3 | 17.0 |
 |
| Oil level/filler plug | 23 | 2.3 | 17.0 |
|
| 4WD switch | 19 | 1.9 | 14.0 |
|
| 4WD low switch | 19 | 1.9 | 14.0 |
|
| VSS bolt | 5 | 0.5 | 3.5 |
|
| Transfer mounting nut | 30 | 3.0 | 22.0 |
|
| Flange nut | 130 | 13.0 | 94.0 |
|
| Transfer case bolt | 18 | 1.8 | 13.0 |
|
| Transfer shift actuator bolt | 20 | 2.0 | 14.5 |
|
| Straight pin plug | 25 | 2.5 | 18.0 |
|
| Transfer oil protect plate bolt | 5 | 0.5 | 3.5 |
|
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.