3C
Rear Case Assembly Disassembly and Reassembly
CAUTION:
Pave waste cloth under case in order to prevent mating surface from damage.
Disassembly
1) Remove rear case oil seal from rear case using special tool.
Special Tool
(A) : 09913–50121
2) Remove circlip (1) using special tool (A), and then remove rear case bearing (2) using special tool (B).
Special Tool
(A) : 09900–06108
(B) : 09913–75830
Reassembly
1) Install rear case bearing to rear case (1) using special tool and hammer, and fix it with new circlip.
Special Tool
(A) : 09913–75810
(B) : 09944–66020
2) Using special tool and hammer, install rear case oil seal (1) to rear case at specified position. Apply grease to oil seal lip.
Special Tool
(A) : 09913–75810
“A” : Grease 99000–25010 ( SUZUKI Super Grease A )
Transfer rear case oil seal installing position
“a”: 83.9 – 84.9 mm (3.30 – 3.34 in.)
2. Rear case bearing
3. Circlip