3C
Transfer Shift Actuator Inspection
Inspect operation of transfer shift actuator as follows.
If actuator does not work correctly, replace actuator assembly.
2)
Connect 2 dry cell batteries in series.
3)
Connect battery (+) to “a”, (–) to “f” and service wire (1) to “c” and “e” respectively, then change motor position from 4H to 4L.
4)
Connect battery (+) to “f”, (–) to “d” and service wire (1) to “c” and “e” respectively, then change motor position from 4L to 4H.
5)
Connect battery (+) to “f”, (–) to “a” and service wire (1) to “c” and “e” respectively, then change motor position from 4H to 2H.
6)
Connect battery (+) to “b”, (–) to “f” and service wire (1) to “c” and “e” respectively, then change motor position from 2H to 4H.
2.
|
Dry cell battery of 1.5 V
|
Limit switch circuit table