1. | Flange nut | 14. | Output shaft snap ring | 27. | Rear flange |
2. | Output front flange | 15. | Output front shaft bearing | 28. | Counter gear No.1 bearing |
![]() |
Front case No.1 oil seal
: Apply grease 99000-25010 to oil seal lip. |
16. | Output low gear | 29. | Counter gear |
4. | Front case No.1 bearing | 17. | Output rear shaft No.1 bearing | 30. | Counter gear No.2 bearing |
5. | Circlip | 18. | Output rear shaft | 31. | Input front flange |
6. | Output front shaft bearing |
![]() |
O-ring
: Apply grease 99000-25010 to all around surface. |
![]() |
Front case No.2 oil seal
: Apply grease 99000-25010 to oil seal lip. |
7. | Output front shaft | 20. | Reduction clutch sleeve | 33. | Front case No.2 bearing |
8. | Front drive clutch hub | 21. | Output rear shaft No.2 bearing | 34. | Input shaft |
9. | Key spring | 22. | Thrust bearing | 35. | Input shaft bearing |
10. | Steel ball | 23. | Sprocket output gear | 36. | Drive chain |
11. | Key | 24. | VSS rotor |
![]() |
Do not reuse. |
12. | Front drive clutch hub sleeve | 25. | Rear case bearing |
![]() |
Tightening torque |
13. | Synchronizer ring |
![]() |
Rear case oil seal
: Apply grease 99000-25010 to oil seal lip. |
![]() |
Apply transfer gear oil |