3C
Transfer Gear Oil Change
NOTE:
Whenever vehicle is hoisted for any service work other than oil change, also be sure to check for oil leakage.
1) Before changing or inspecting oil, be sure to stop engine and lift vehicle horizontally.
2) With vehicle lifted up, check oil leakage. If leakage exists, correct or repair it.
3) Remove oil filler plug (2).
4) Remove drain plug (1), and drain old oil.
5) Tighten new oil drain plug to specified torque.
Tightening torque
Oil drain plug ( a ): 23 N·m ( 2.3 kg-m, 17.0 lb-ft)
6) Pour new specified oil unit oil level reaches bottom of oil filler plug hole (3) as shown in figure.
NOTE:
• For SAE classification, refer to viscosity chart [A].
• It is high recommended to use API GL-4 75 W – 90 gear oil.
Oil specification
API GL-4
Transfer gear oil capacity
: 1.13 liters (2.4/2.0 US/Imp. pt)
7) Tighten new oil level/filler plug to specified torque.
Tightening torque
Oil level/filler plug ( b ): 23 N·m ( 2.3 kg-m, 17.0 lb-ft)