Tightening Torque Specifications - Suzuki Jimny Workshop Manual
3B
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Front differential oil drain plug | 27 | 2.7 | 19.5 |
 |
| Front differential oil level/filler plug | 50 | 5.0 | 36.5 |
|
| Differential carrier bolt (Bolt length: 30.5 mm) | 23 | 2.3 | 17.0 |
|
| Differential carrier bolt (Bolt length: 37.5 mm) | 30 | 3.0 | 22.0 |
|
| Propeller shaft bolt | 50 | 5.0 | 36.5 |
|
| Drive bevel gear bolt | 85 | 8.5 | 61.5 |
|
| Flange nut | 100 – 400 | 10 – 40 | 72 – 289 |
|
| Bearing cap bolt | 15 | 1.5 | 11.0 |
|
| Bearing cap bolt | 50 | 5.0 | 36.5 |
|
| Lock plate bolt | 11.5 | 1.15 | 8.5 |
|
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.