1. | Companion flange | 10. | Differential pinion | 19. | Pinion washer |
2. | Drive bevel / Hypoid gear set | 11. | Differential gear | 20. |
Drive bevel gear bolt
: Apply thread lock cement 99000-32110 to thread. |
3. | Drive bevel pinion spacer | 12. | Pinion shaft | 21. |
Differential carrier bolt
(Bolt length: 30.5 mm (1.201 in)) : Apply sealant 99000-31110 to thread. |
4. | Shim | 13. | Differential case | 22. |
Differential carrier bolt
(Bolt length: 37.5 mm (1.476 in)) : Apply sealant 99000-31110 to thread. |
5. | Drive bevel pinion rear bearing | 14. | Differential side bearing cap | : | Do not reuse. |
6. | Drive bevel pinion front bearing | 15. | Thrust washer | : | Tightening torque |
7. |
Oil seal
: Apply grease 99500-25010 to oil seal lip. |
16. | Differential side bearing |
:
|
Apply differential oil. |
8. |
Flange nut
: After tightening nut so as rotational torque of drive bevel pinion to be in specified torque, caulk nut securely. |
17. | Differential side bearing adjuster | ||
9. |
Differential carrier
: Apply sealant 99000-31110 to mating face with axle housing. |
18. | Lock plate |