Tightening Torque Specifications - Suzuki Jimny Workshop Manual
2C
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Lateral rod bolt and nut (for 7T strength bolt and nut) | 90 | 9.0 | 65.0 |
 |
| Lateral rod bolt and nut (for 10.9 strength bolt and nut) | 55 | 5.5 | 40.0 |
|
| Rear shock absorber upper bolt | 85 | 8.5 | 61.5 |
|
| Rear shock absorber lower bolt | 85 | 8.5 | 61.5 |
|
| Wheel nut | 100 | 10.2 | 74.0 |
|
| Bump stopper | 50 | 5.0 | 36.5 |
|
| Trailing arm nut (for 8.8 & 7T strength bolt) | 90 | 9.0 | 65.0 |
|
| Trailing arm nut (for 10.9 strength bolt) | 55 | 5.5 | 40.0 |
|
| Rear differential carrier bolt | 23 | 2.3 | 17.0 |
|
| Rear propeller shaft bolt | 50 | 5.0 | 36.5 |
|
| Brake pipe flare nut | 16 | 1.6 | 11.5 |
|
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.