2C
Bump Stopper Removal and Installation
Removal
1) Hoist vehicle and remove rear wheel.
2) Remove bump stopper (1) by using special tool.
Special Tool
(A) : 09941–66010
Installation
Reference: Bump Stopper / Spring Rubber Seat Inspection
1) Tighten bump stopper (1) to specified torque by using special tool.
Special Tool
(A) : 09941–66010
Tightening torque
Bump stopper ( a ): 50 N·m ( 5.0 kg-m, 36.5 lb-ft)
2) Install wheel and tighten wheel nuts to specified torque.
Tightening torque
Wheel nut ( a ): 100 N·m ( 10.2 kg-m, 74.0 lb-ft)