Tightening Torque Specifications - Suzuki Jimny Workshop Manual
2B
Tightening Torque Specifications
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Tie-rod end lock nut | 65 | 6.5 | 47.0 |
 |
| Stabilizer mount bracket bolt | 20 | 2.0 | 14.5 |
|
| Stabilizer ball joint nut | 50 | 5.0 | 36.5 |
|
| Shock absorber lock nut | 29 | 2.9 | 21.0 |
|
| Shock absorber lower nut | 90 | 9.0 | 65.0 |
|
| Brake caliper carrier bolt | 85 | 8.5 | 61.5 |
|
| Wheel nut | 100 | 10.2 | 74.0 |
|
| Lateral rod bolt and nut (for 7T strength bolt and nut) | 90 | 9.0 | 65.0 |
|
| Lateral rod bolt and nut (for 10.9 strength bolt and nut) | 55 | 5.5 | 40.0 |
|
| Vacuum pipe clamp bolt | 5.5 | 0.55 | 4.0 |
|
| Leading arm nut (for 8.8 & 7T strength bolt) | 90 | 9.0 | 65.0 |
|
| Leading arm nut (for 10.9 strength bolt) | 55 | 5.5 | 40.0 |
|
| Front differential carrier bolt | 23 | 2.3 | 17.0 |
|
| Front propeller shaft flange bolt | 50 | 5.0 | 36.5 |
|
| Tie rod end nut and drag rod end nut (Knuckle side) | 43 | 4.3 | 31.5 |
|
Reference:
For the tightening torque of fastener not specified in this section, refer to
Fasteners Information
.