1. | Seal ring | 9-1. | Mounting No.3 (Type A) | 16. | Pressure plate block |
2. | Exhaust pipe stud bolt | 9-2. | Mounting No.3 (Type B) | 17. | Exhaust pipe No.1 |
3. | Exhaust pipe No.2 | 10. | Muffler |
![]() |
Catalyst stiffener bolt
: Tighten 27 N·m (2.7 kgf-m, 19.5 lbf-ft) by the specified procedure. |
![]() |
Exhaust pipe nut
: Tighten torque
•
Without flange: 27 N·m (2.7 kgf-m, 19.5 lbf-ft)
• With flange: 29 N·m (2.9 kgf-m, 21.0 lbf-ft) |
11. | Muffler nut |
![]() |
Pressure plate block bolt
: Tighten 27 N·m (2.7 kgf-m, 19.5 lbf-ft) by the specified procedure. |
5. | Mounting No.1 | 12. | Gasket |
![]() |
Tightening torque |
6. | Center pipe bolt | 13. | Catalyst stiffener No.1 |
![]() |
Do not reuse. |
7. | Center pipe | 14. | Pressure plate | ||
8. | Mounting No.2 | 15. | Catalyst stiffener No.2 |