1J
Generator Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Remove in order as shown in the figure.
1. Generator cover 6. Vacuum hose 11. A/C receiver/dryer bolts (If Equipped)
2. Drive belt 7. “B” terminal nut 12. Generator bolts
3. Generator upper bracket 8. “B” terminal wire 13. Generator
4. Generator upper bracket bolt 9. Oil hose 14. Vacuum pump
5. Idler pulley No.2 10. Connector icon : Tightening torque
Installation
Reverse removal procedure for installation.