1I
Starting motor does not stop running
Possible symptoms due to starting system trouble would be as follows:
•
Starting motor does not run (or runs slowly)
•
Starting motor runs but fails to crank engine
•
Abnormal noise is heard
Proper diagnosis must be made to determine exactly where the cause of each trouble lies.....in battery, wiring harness, (including starting motor switch), starting motor control relay (for K9K Engine), starting motor or engine.
Do not remove motor just because starting motor does not run. Check the following items and narrow down scope of possible causes.
1)
Condition of trouble
2)
Tightness of battery terminals (including ground cable connection on engine side) and starting motor terminals
3)
Discharge of battery
4)
Mounting of starting motor
For K9K Engine
| Condition |
Possible Cause |
Action |
|---|
|
Starting motor does not stop running
|
Fused contact points of magnetic switch
|
Replace starting motor.
|
|
Short-circuit between turns of magnetic switch coil (layer short-circuit)
|
Replace starting motor.
|
|
Failure of returning action in ignition switch
|
Replace.
|