1H
Ignition Coil Assembly (Including ignitor) Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Remove cylinder head upper cover.
3) Disconnect ignition coil connector.
4) Disconnect high-tension cord (3) from ignition coil assembly (2).
5) Remove ignition coil bolts (1) and then pull out ignition coil assembly.
Installation
Reference: Ignition Coil Assembly (Including ignitor) Inspection:M13A
1) Install ignition coil assembly.
2) Tighten ignition coil bolts, and then connect ignition coil connector.
3) Install high-tension cord to ignition coil assembly while gripping its cap.
4) Install cylinder head upper cover.