1H
Spark Plug Removal and Installation
Removal
1) Remove cylinder head upper cover.
2) Pull out high-tension cords by gripping their caps and then remove ignition coil assemblies referring to Ignition Coil Assembly (Including ignitor) Removal and Installation:M13A .
3) Remove spark plugs.
Installation
1) Install spark plugs and torque them to specification.
Tightening torque
Spark plug : 25 N·m ( 2.5 kg-m, 18.0 lb-ft)
2) Install ignition coil assemblies referring to Ignition Coil Assembly (Including ignitor) Removal and Installation:M13A .
3) Install high-tension cords securely by gripping their caps.
4) Install cylinder head upper cover.