High-Tension Cord Removal and Installation - Suzuki Jimny Workshop Manual
1H
High-Tension Cord Removal and Installation
Removal
1)
Remove cylinder head upper cover and disconnect high-tension cords (2) from ignition coil assemblies (1) while gripping each cap.
2)
Pull out high-tension cords from spark plugs while gripping each cap.
CAUTION:
•
Removal of high-tension cords together with clamps will be recommended so as not to damage their inside wire (resistive conductor).
• For the same reason, pull out each connection by gripping cap portion.
• For the same reason, pull out each connection by gripping cap portion.
Installation
1)
Install high-tension cords (2) to spark plugs and ignition coil assemblies (1) while gripping each cap.
CAUTION:
•
Never attempt to use metal conductor high–tension cords as replacing parts.
• Insert each cap portion fully when installing high-tension cords.
• Insert each cap portion fully when installing high-tension cords.